How to Do a Pre-Trip Check Before Pulling a Trailer

It does not matter large or small your trailer is, nor how much experience you might have pulling one; everyone should perform a solid towing safety inspection before hitting the road for a long-distance trip. Continue below to either learn or refresh your memory on how to do a pre-trip check before pulling a trailer long distance.

Indiana Towing and Vehicle Transportation Services 317-247-8484
Indiana Towing and Vehicle Transportation Services 317-247-8484

Pre-Trip Trailer Towing Inspection

Everything needs to be inspected for optimal safety and performance when preparing to pull a trailer. Even for short-distance towing, inspecting your towing and vehicle setup is vital for both the safety of you and your passengers, as well as your cargo. All towing and trailer equipment needs to be checked and if necessary, serviced or replaced, including hitch and receiver, safety chains, electrical setups, hitch and turn signals, lights, and the overall trailer clearance.

In addition to checking all equipment, it is wise to review your state’s trailer towing requirements or regulations, and in all states that you plan to pass through as well. Some states require you to stay in the far right lanes, or drive at a certain speed, when towing a trailer. You do not want to be in violation of any towing rules, as this could slow you down from getting to your destination, plus make you pay a fine!

For Beginners

If you have never pulled at trailer before, it is vital that you practice. It takes a lot longer to come to a complete stop when towing a trailer, plus taking turns, backing up, parking, and maneuvering through traffic is all different than driving a regular car. Furthermore, you need to educate yourself on all proper trailer setup and maintenance practices in order to remain safe and within local and state regulations.

Pre-Trip Inspection Checklist:

Check that the trailer is properly attached to the hitch, and perfectly secure. The trailer’s tongue should be connected to the hitch, and all locking mechanisms are secured.

You should not be able to lift the trailer off the hitch after it has been snapped and locked in place. Your safety chains should be criss-crossed between the towing vehicle and the trailer.

Check that all electrical wires are connected, and that the brake lights and turn signals are working in conjunction with one another. It helps to have a partner work the towing vehicle’s brakes and turn signals while you stand behind the trailer and watch for them to come on. No partner? Use the reflection of windows or windshields instead.

Do you need some help with towing some cargo long-distance? Contact Zore’s Towing for professional long-distance towing services in Indianapolis, Indiana. We serve all of Central Indiana, including Lebanon, Greenwood, and Avon areas.

You Might Also Like:

Long Distance Driving Tips for Summer
How to Prepare a Car for a Long Distance Tow
What You Need to Know About State Trailer Laws

Indianapolis Towing & Recovery 317-247-8484